Purdue University Graduate School
Browse

Burst-Mode Laser Development for MHz-Rate Diagnostics

Download (4.8 MB)
thesis
posted on 2020-12-16, 02:53 authored by Michael SmyserMichael Smyser
This Ph.D. work is dedicated to advancements in burst-mode laser technology and their applications in MHz-rate high-speed gas-phase environments. A comprehensive computational model for simulating experimental burst-mode systems is discussed. Direct comparison of the modeled results to the output of a constructed nanosecond (ns) burst-mode laser shows agreement within a factor of 2 for output energy, the temporal domain skews positively in an appropriate manner, and the spectral domain correctly remains unchanged. The modeled output of a femtosecond (fs) burst-mode laser displays near perfect agreement with its hardware, generating only a 1.7% deviation for output energy, an 11% deviation in spectral bandwidth, and a temporal profile that correctly remains unchanged. The experimental ns to fs burst-mode lasers systems used to compare with the aforementioned model are described in detail and demonstrated for use in measurements of temperature, species, and velocity at high repetition rates. In the ns regime, a compact-footprint (0.18 m2 ) flashlamp-pumped, burst-mode Nd:YAGbased master-oscillator power-amplifier (MOPA) laser is developed with a fundamental 1064 nm output of over 14 J per burst. This portable laser system uses a directly modulated diode laser seed source to generate 10 ms duration arbitrary sequences of 500 kHz doublet or MHz singlet pulses for flow-field velocity or species measurements, respectively. In the fs regime, a flashlamp-pumped burst-mode laser system with high peak power and a broad spectral bandwidth of >10 nm is constructed without the use of nonlinear compression techniques. A mode-locked, 1064.6 nm fundamental-wavelength broadband master oscillator, a fiber amplifier/pulse stretcher, and four Nd:glass power amplifiers are used to generate a sequence of high-repetition-rate, transform-limited 234 fs pulses over a 1 ms burst duration at a 0.1 Hz burst repetition rate. The generated peak powers are 1.24 GW at 100 kHz and 500 MW at 1 MHz with M2∼1.5. An adaptation of the fs burst-mode laser is used for femtosecond laser electronic excitation tagging (FLEET) of nitrogen for tracking the velocity field in high-speed flows at kilohertz– megahertz (kHz–MHz) repetition rates without the use of added tracers. The fs burst-mode laser is used to produce 500 pulses per burst with pulses having a temporal separation as short as 1 µs, an energy of 120 µJ, and a duration of 274 fs. This enables 2 orders of magnitude higher measurement bandwidth over conventional kHz-rate FLEET velocimetry. 15 The fs burst-mode system was further improved to include a picosecond (ps) leg for hybrid fs/ps rotational coherent anti-Stokes Raman scattering (RCARS) at MHz rates. Using a common fs oscillator, the system simultaneously generates time synchronized 1061 nm, 274 fs and 1064 nm, 15.5 ps pulses with peak powers of 350 MW and 2.5 MW, respectively. The system is demonstrated for two-beam fs/ps RCARS in N2 at 1 MHz with a signal-to-noise ratio of 176 at room temperature. This repetition rate is an order of magnitude higher than previous CARS using burst-mode ps laser systems and two to three orders of magnitude faster than previous continuously pulsed fs or fs/ps laser systems. As a continuation of the above advances in fs regime, a regenerative fs burst-mode laser is discussed in detail with motivations, design layouts, and cavity physics laid out. Preliminary construction of the system with a ns seed source is underway to assess the detailed system design and evaluate the potential for optical damage due to Kerr lensing or other nonlinear effects. This system and other potential follow-on research topics are discussed.

History

Degree Type

  • Doctor of Philosophy

Department

  • Mechanical Engineering

Campus location

  • West Lafayette

Advisor/Supervisor/Committee Chair

Terrence Meyer

Advisor/Supervisor/Committee co-chair

Mikhail Slipchenko

Additional Committee Member 2

Guillermo Paniagua

Additional Committee Member 3

Haifeng Wang

Usage metrics

    Licence

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC