Purdue University Graduate School
Browse

Computational Investigation of Cavity Leakage Flow and Windage Heating Within an Axial Compressor Stator Well

Download (8.63 MB)
thesis
posted on 2019-01-04, 02:30 authored by Nitya KamdarNitya Kamdar

The fundamental design of axial compressors has matured to an exceptional level of performance due to a century of research. With the improvements in efficiency becoming increasingly difficult, attention continues to be channeled towards understanding and reducing secondary losses such as hub or tip clearance leakages, seal leakages, etc. Studies detailing the impact of seal leakages are relatively scarce due to difficulties of obtaining data in the complex rotating geometries of a high-speed compressor cavity. While the impact of seal leakages on primary passage is readily available, details inside the cavity geometry is scarce in open literature because majority of the investigations have been performed on linear cascades with slots machined as cavities or standalone labyrinth seals that fail to provide a wholesome understanding of the leakage flow and windage heating in the rotating geometries.

Therefore, the principal objective of this work is to investigate flow physics in the stator cavity wells for understanding the flow path of the leakage fluid and windage heating within the cavity. A parametric model of the Purdue 3-Stage Compressor (P3S) is used to allow for rapid geometric modifications to the seal clearances in a coupled stator-cavity system. The investigations presented here consist of a series of numerical simulations using ANSYS CFX as the primary Computational Fluid Dynamics (CFD) tool. Measurements performed by previous investigators are utilized to define the boundary conditions of this model. This study’s goal is to characterize the interdependence of parameters such as cavity leakage flow rate, circumferential velocity, and windage heating for understanding the flow structure inside the cavity wells and their impact on cavity temperatures. Data acquired is intended to reveal mechanisms through which cavity leakage flows affect the stator passage aerodynamics and the windage heating, both regarding their effect on the compressor performance and the details of the flow path within the cavity. Consequently, this will provide insight into how the complex cavity leakage flow influences the design considerations for optimizing stator passage aerodynamics and minimizing stator cavity heating.

The compressor operating conditions of Nominal Loading (NL) is the focus of this CFD work since the flow field at High Loading (HL) has significant boundary layer separation. NL is closest to both the design and peak efficiency conditions where the compressor would spend the majority of its time in operation, understanding cavity flow physics at this operating condition would have a direct impact on enhancing the overall compressor performance. A CFD model of the standalone primary passage is developed first using the dataset available from experiments performed by previous investigators for establishing confidence in the primary passage flow physics. Therefore, detailed total pressure, total temperature, velocity, and flow angle data collected behind each blade row is utilized for validating the primary passage flow in the CFD model. After validating the primary passage model, measurements in the coupled cavity model are acquired to understand the flow variations as well as temperature development in the cavity due to the varying labyrinth seal clearance.

The investigations in this work are divided into two distinct branches. First, to aid the aerodynamic research community, the flow structure inside the cavity wells is investigated to understand the impact cavity leakage flow has on the compressor efficiency and on its interactions with the primary flow path. Secondly, for understanding the development and rise of temperature in the cavity wells, i.e., the windage effect, are performed to aid the thermo-mechanical research community so that the material choices and stress analysis of the cavity components can be optimized. Hence, the trends in the data acquired provide the aerodynamic, mechanical, and secondary flow system designers an indication of the complexities of the flow within shrouded stator cavities and provide insight into designing and optimizing more complex geometries.

Results from this investigation describe how increasing seal clearance deteriorates the stator performance and enables the cross-passage migration of low momentum fluid to worsen hub corner separation. The simulations also state the case for re-ingestion at tight seal clearances as the 3D streamlines show heated efflux emerges from the upstream cavity interface, dwells near the hub, and gets recirculated back into the cavity inlet well. Radial variations inside the cavity wells show high cavity temperatures with excessive cavity due to re-ingestion, while the cases that avoid re-ingestion are observed at the lowest temperatures. These radial variations also identify the cavity leakage flow path and the development of circumferential velocity. Lastly, the total pressure loss, total temperature rise and windage heating, all show a strong dependence on circumferential velocity development, which is inherently dependent on the labyrinth seal clearances.

History

Degree Type

  • Master of Science in Mechanical Engineering

Department

  • Mechanical Engineering

Campus location

  • West Lafayette

Advisor/Supervisor/Committee Chair

Dr. Nicole Key

Additional Committee Member 2

Dr. Ivan Christov

Additional Committee Member 3

Dr. Tom Shih

Usage metrics

    Licence

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC