Purdue University Graduate School
181214_AJS_Thesis_final_v2.pdf (8.95 MB)

Synthesis and Characterization of Copper-Exchanged Zeolite Catalysts and Kinetic Studies on NOx Selective Catalytic Reduction with Ammonia

Download (8.95 MB)
posted on 2019-01-16, 14:59 authored by Arthur J. ShihArthur J. Shih

Although Cu-SSZ-13 zeolites are used commercially in diesel engine exhaust after-treatment for abatement of toxic NOx pollutants via selective catalytic reduction (SCR) with NH3, molecular details of its active centers and mechanistic details of the redox reactions they catalyze, specifically of the Cu(I) to Cu(II) oxidation half-reaction, are not well understood. A detailed understanding of the SCR reaction mechanism and nature of the Cu active site would provide insight into their catalytic performance and guidance on synthesizing materials with improved low temperature (< 473 K) reactivity and stability against deactivation (e.g. hydrothermal, sulfur oxides). We use computational, titration, spectroscopic, and kinetic techniques to elucidate (1) the presence of two types of Cu2+ ions in Cu-SSZ-13 materials, (2) molecular details on how these Cu cations, facilitated by NH3 solvation, undergo a reduction-oxidation catalytic cycle, and (3) that sulfur oxides poison the two different types of Cu2+ ions to different extents at via different mechanisms.

Copper was exchanged onto H-SSZ-13 samples with different Si:Al ratios (4.5, 15, and 25) via liquid-phase ion exchange using Cu(NO3)2 as the precursor. The speciation of copper started from the most stable Cu2+ coordinated to two anionic sites on the zeolite framework to [CuOH]+ coordinated to only one anionic site on the zeolite framework with increasing Cu:Al ratios. The number of Cu2+ and [CuOH]+ sites was quantified by selective NH3 titration of the number of residual Brønsted acid sites after Cu exchange, and by quantification of Brønsted acidic Si(OH)Al and CuOH stretching vibrations from IR spectra. Cu-SSZ-13 with similar Cu densities and anionic framework site densities exhibit similar standard SCR rates, apparent activation energies, and orders regardless of the fraction of Z2Cu and ZCuOH sites, indicating that both sites are equally active within measurable error for SCR.

The standard SCR reaction uses O2 as the oxidant (4NH3 + 4NO + O2 -> 6H2O + 4N2) and involves a Cu(I)/Cu(II) redox cycle, with Cu(II) reduction mediated by NO and NH3, and Cu(I) oxidation mediated by NO and O2. In contrast, the fast SCR reaction (4NH3 + 2NO + 2NO2 -> 6H2O + 4N2) uses NO2 as the oxidant. Low temperature (437 K) standard SCR reaction kinetics over Cu-SSZ-13 zeolites depend on the spatial density and distribution of Cu ions, varied by changing the Cu:Al and Si:Al ratio. Facilitated by NH3 solvation, mobile Cu(I) complexes can dimerize with other Cu(I) complexes within diffusion distances to activate O2, as demonstrated through X-ray absorption spectroscopy and density functional theory calculations. Monte Carlo simulations are used to define average Cu-Cu distances. In contrast with O2-assisted oxidation reactions, NO2 oxidizes single Cu(I) complexes with similar kinetics among samples of varying Cu spatial density. These findings demonstrate that low temperature standard SCR is dependent on Cu spatial density and requires NH3 solvation to mobilize Cu(I) sites to activate O2, while in contrast fast SCR uses NO2 to oxidize single Cu(I) sites.

We also studied the effect of sulfur oxides, a common poison in diesel exhaust, on Cu-SSZ-13 zeolites. Model Cu-SSZ-13 samples exposed to dry SO2 and O2 streams at 473 and 673 K. These Cu-SSZ-13 zeolites were synthesized and characterized to contain distinct Cu active site types, predominantly either divalent Cu2+ ions exchanged at proximal framework Al sites (Z2Cu), or monovalent CuOH+ complexes exchanged at isolated framework Al sites (ZCuOH). On the model Z2Cu sample, SCR turnover rates (473 K, per Cu) catalyst decreased linearly with increasing S content to undetectable values at equimolar S:Cu molar ratios, while apparent activation energies remained constant at ~65 kJ mol-1, consistent with poisoning of each Z2Cu site with one SO2-derived intermediate. On the model ZCuOH sample, SCR turnover rates also decreased linearly with increasing S content, yet apparent activation energies decreased monotonically from ~50 to ~10 kJ mol-1, suggesting that multiple phenomena are responsible for the observed poisoning behavior and consistent with findings that SO2 exposure led to additional storage of SO2-derived intermediates on non-Cu surface sites. Changes to Cu2+ charge transfer features in UV-Visible spectra were more pronounced for SO2-poisoned ZCuOH than Z2Cu sites, while X-ray diffraction and micropore volume measurements show evidence of partial occlusion of microporous voids by SO2-derived deposits, suggesting that deactivation may not only reflect Cu site poisoning. Density functional theory calculations are used to identify the structures and binding energies of different SO2-derived intermediates at Z2Cu and ZCuOH sites. It is found that bisulfates are particularly low in energy, and residual Brønsted protons are liberated as these bisulfates are formed. These findings indicate that Z2Cu sites are more resistant to SO2 poisoning than ZCuOH sites, and are easier to regenerate once poisoned.


National Science Foundation GOALI 1258715-CBET

Department of Energy Vehicle Technology Program DE-EE0003977

Cummins Inc.


Degree Type

  • Doctor of Philosophy


  • Chemical Engineering

Campus location

  • West Lafayette

Advisor/Supervisor/Committee Chair

Fabio H. Ribeiro

Advisor/Supervisor/Committee co-chair

Rajamani Gounder

Additional Committee Member 2

Jeffrey Greeley

Additional Committee Member 3

Aleksey Yezerets