MACHINE LEARNING MODEL FOR ESTIMATION OF SYSTEM PROPERTIES DURING CYCLING OF COAL-FIRED STEAM GENERATOR
thesisposted on 2020-05-06, 01:12 authored by Abhishek NavarkarAbhishek Navarkar
The intermittent nature of renewable energy, variations in energy demand, and fluctuations in oil and gas prices have all contributed to variable demand for power generation from coal-burning power plants. The varying demand leads to load-follow and on/off operations referred to as cycling. Cycling causes transients of properties such as pressure and temperature within various components of the steam generation system. The transients can cause increased damage because of fatigue and creep-fatigue interactions shortening the life of components. The data-driven model based on artificial neural networks (ANN) is developed for the first time to estimate properties of the steam generator components during cycling operations of a power plant. This approach utilizes data from the Coal Creek Station power plant located in North Dakota, USA collected over 10 years with a 1-hour resolution. Cycling characteristics of the plant are identified using a time-series of gross power. The ANN model estimates the component properties, for a given gross power profile and initial conditions, as they vary during cycling operations. As a representative example, the ANN estimates are presented for the superheater outlet pressure, reheater inlet temperature, and flue gas temperature at the air heater inlet. The changes in these variables as a function of the gross power over the time duration are compared with measurements to assess the predictive capability of the model. Mean square errors of 4.49E-04 for superheater outlet pressure, 1.62E-03 for reheater inlet temperature, and 4.14E-04 for flue gas temperature at the air heater inlet were observed.
U.S. Department of Energy under Grant No. DE-FOA-0001989 through National Rural Electric Cooperative Association (NRECA)
- Master of Science in Mechanical Engineering
- Mechanical Engineering
- West Lafayette